Inflatable Exhaust Jacks: Buyer’s Guide and Reviews

Although conventional floor jacks are the most popular, if you’re stuck by the side of the road or get caught with a flat tire off-roading, a floor jack simply won’t do. Hydraulic floor jacks are far too heavy and cumbersome to be carried around everywhere, and the smaller mechanical ones don’t like rough and uneven surfaces.

The solution to this issue is the inflatable exhaust car jack. These may sound underpowered if this is the first time you’re hearing about them, but they work like a charm. The concept behind it is really simple and straightforward.

How Inflatable Car Jacks Work

Your car produces exhaust emissions constantly, even when it’s idling (providing the engine isn’t off of course). Think of exhaust car jacks like large balloons you can fill up with the exhaust gases. You don’t have to manually pump air into them or spend hours trying to unpack them. Simply attach a cord from the exhaust tip to the jack and watch it go up in a matter of minutes.

Are They Really Going to Support My Car’s Weight?

At this point, you’re probably thinking that they’re brittle and weak since they’re filled with gases. Although they’re not as strong as conventional hydraulic car jacks on paper, they’re much more reliable and tough compared to their mechanical counterparts. Most inflatable exhaust jacks on sale today can lift 3 tons, and even the cheapest ones can easily manage way over 2 tons. Given that most cars weight well below 2 tons and even fully-built Jeep off-roaders rarely exceed 2.5 tons, an inflatable exhaust jack is all the gear you’re ever going to need.

Why Should I Bring an Inflatable Car Jack?

For starters, an inflatable car jack is really practical, as we mentioned. It doesn’t take up half of your trunk space and more importantly, it doesn’t weigh anything. When it’s deflated and not in use, you can literally squeeze it just about anywhere. So, as a tool to have lying around, it won’t cost you anything to bring it everywhere with you.

If you do happen to have a mechanical issue or need to replace a tire, simply take it out and inflate it under the car. A car jack powered by gases doesn’t care about the type of surface it’s on. Air can bend in every direction, and the flexible materials the jacks are made out of means that the jack itself will take the shape of anything which happens to be underneath it. You can quite literally jack a car up while the jack itself is on a rock. Plus, soft stuff like sand and mud won’t bother it either, since it’s got a lot of surface area to play with.

If you happen to get stuck in your new Jeep while off-roading, it might even manage to help you break free. When you’re done, deflate it and store it again. It really is a brilliant idea and we feel everyone who even occasionally off-roads should carry an inflatable exhaust jack in their car at all times.

The 3 Best Inflatable Exhaust Car Jacks

ARB Orange Bushranger X-Jack Kit

Inflatable Exhaust Jacks


When it comes to inflatable car jacks, ARB is king. Their X-Jack kits come in varying shapes and sizes to suit many different car types. The smallest offerings can support vehicles up to 4,400 lbs., though you can find models which surpass those figures.

If you’ve got a Jeep or a similar off-road ready vehicle, we recommend you go for the higher X-Jack models which offer better specifications. The inflation time is rated at 2-3 minutes and the Bushranger features a bypass valve, so overinflating the jack is virtually impossible.


Westfalia’s car jack offering can hold an astonishing 6,600 lbs. It’s also incredible value for money. It’s a bit cheaper than the equivalent ARB, but offers nearly the same specifications. The maximum lift is 60 cm but the fill-up time is slightly longer at 3-5 minutes. It’s suitable for both gasoline and diesel engines, just like the ARB. It’s almost as good as the X-Jack quality-wise, but the price won’t break the bank.


Finally, we get to the heavy-hitter. The Vogvigo can support an incredible 4 tons (8,800 lbs.). Unless you drive a military tank or something of that nature, the Vogvigo will easily lift your truck/SUV/car without a single issue. If you’re concerned about weight, this is the jack to buy. Price-wise it’s about the same as the Westfalia, so again, no drawbacks there.

Although both the ARB and the Westfalia are excellent choices, we strongly recommend the Vogvigo simply for its sheer scope of abilities.



Top 10 Best Bottle Jack 2018- Reviews & Buying guide

Hey there! You probably landed here looking for the best bottle jack to perform quick repairing tasks for your vehicle, right? See, I got you!


Well, nothing beats bottle jacks when it comes to lifting our light to medium weight personal vehicles in order to perform repairs, tire changes, or so on. They have a way smaller footprint than a full-size floor jack, is pretty cheap compared to them yet does the work effectively as they’re surprisingly powerful for such small devices, so win-win all around!


Understanding the usefulness of a bottle jack is no daunting task, you probably already know them and that’s why you’re here looking for the best one in the market that provides full value for your money. Now, finding that perfect bottle jack is not really easy for you, I guess. No worries, I’ll make it easy for ya!


If you believe you don’t know all about bottle jacks, which is crucial to pick the perfect one, read from the experts. I’m not bragging, but as I had to deal with all these machinery for a really long career, I know them. With all my knowledge and experience, I’ve picked the best 10 bottle jacks available in the market that provides good value for the money.


Some quick tips on how to operate a bottle jack properly, maintenance of these jacks, and solutions to some common bottle jack problems will also be given in this piece. It’s a goldmine of information about bottle jacks, so derive as much as you can!


In a Hurry? Need a Quick Pick? Here’s a Comparison Table for You!

NameImageLift CapacityOur RatingPrice
Torin Big RedATD Tools 7387 Bottle Jack  - 20 Ton20 Ton✪✪✪✪✪
ATD Tools 7387ATD Tools 7387 Bottle Jack  - 20 Ton20 TON✪✪✪✪✪
Torin Big Red HydraulicTorin Big Red Hydraulic Bottle Jack, 4 Ton Capacity4 TON✪✪✪✪
Powerbuilt 640912Powerbuilt 640912 All-In-One 3-Ton Bottle Jack with Jack Stand3 TON✪✪✪✪
Pro-Lift B-006DPro-Lift B-006D Grey Hydraulic Bottle Jack- 6 Ton Capacity6 TON✪✪✪✪✪
Torin Hydraulic Stubbybest bottle jack12 TON✪✪✪✪✪
Powerbuilt 647501Powerbuilt 647501 Heavy Duty 12-Ton Bottle Jack12 TON✪✪✪✪✪
Sunex 4913ASunex 4913A 12-Ton, Short Bottle Jack12 TON✪✪✪
ATD Tools 7385ATD Tools 7385 Short Hydraulic Bottle Jack 12 Ton Capacity12 TON✪✪✪✪
Strongway HydraulicStrongway Hydraulic High Lift Double Ram Bottle Jack2 TON✪✪


Top 10 Best Bottle Jack Reviews

Here’s a quick review of ten bottle jacks available in the market right now. These are undoubtedly the best options for you to choose from.


1.Torin Big Red Air Hydraulic Bottle Jack, 20 Ton Capacity

Torin Big Red Air Hydraulic Bottle Jack

The Torin Big Red Air Hydraulic Bottle Jack (Model Code – T92003) is a commercial grade, yet inexpensive bottle jack that’s on the top my list, because of the outstanding value for money it provides.

It has various models depending on lifting capacity, for different lifting needs, starting from 2 tons to 50 tons. Each of the models is an excellent value provider in its class, though here we’re talking about the 20-ton model.


The jack has a wide, rugged base for great stability. It’s designed for operating either manually or pneumatically. The Torin T92003 meets ASME PALD safety standards and has heavy-duty steel construction, hardened alloy-plated ram for maximum durability.


It’s very professionally welded unlike some Chinese knockoffs and the welding is clean and tight, it ain’t very likely to fall apart.


The jack comes two-piece handle for easy pumping, though the handle could be a bit larger for more leverage and even easier pumping. The jack can lift up to mighty 40,000 lbs and has a generous lifting range of 10-5/16″ to 20-1/8″.


The unit comes with air valves with integrated filters that seals the hydraulic unit and helps prevent contamination. The heavy-duty air motor provides maximum lifting power.


To prevent overloading, the jack comes with safety valve. A particularly appreciable thing on this jack is the quick release couple and the small pneumatic tank that supplies the reserve pressure to the hydraulic system.


The hydraulic cylinder lowers the required oil pressure to lift loads and gives a longer life to the product by reducing wear and tear. But it sometimes leaks fluid, which is definitely not expected.


The Torin T92003, In Brief:

  • A solidly built bottle jack that offers great stability.
  • Small details are well taken care of in this tool.
  • It can lift up to 40,000 lbs and with a lifting range of 10-5/16″ to 20-1/8″.
  • The lifting mechanism is smooth and it needs minimum effort to lift a weight with this, but note that it sometimes leaks fluid.

If you want an inexpensive, commercial grade bottle jack that is solid-built and does its job as needed, you probably won’t get any better option than this.


2. ATD Tools 7387 Bottle Jack  – 20 Ton

ATD Tools 7387 Bottle Jack  - 20 Ton

If you are looking for a jack for low profile machines of yours, the ATD Tools 7387 Short Hydraulic Bottle Jack could be the one for you. Having a minimum height of 6 inches, this jack will fit underneath almost any machine that you might own. And it’s powerful too, at the same time.


The jack has an insane lifting capacity of 20-ton, making it suitable for lifting the heaviest machinery, trucks, construction equipment or any heavy-weight that you might need lifting.


With its power, it can lift a weight of around 5 inches, combining it with its own height of about 6 inches, you’ll have 11 inches space under your machinery to look beneath.


You’ll not have a tough time setting the lowest pickup height possible with heat treated extension screws of this jack, same goes with extending to reach your desired height.


It has a patented bypass device integrated into it. With the mechanism, it automatically stops any ram over-travel attempts and makes itself a safe bottle jack that you can depend on.


The jack is also built well from high-grade steel and meets the ASME/ANSI-PALD safety standards, so you can work with it being tension free of it suddenly failing and breaking apart.


The jack is mainly designed for vertical lifting necessities, but with some tricks, it does a decent job on horizontal lifting too, so that’s a bonus.


The ATD Tools 7387 – Highlighted features:

  • Comes with Heat-treated extension screw.
  • It has a lifting capacity of mighty 20 tons, and lift range of 6-1/2″ – 11-1/4″, so enough weight and height numbers that you want.
  • The jack’s packed with Built-in bypass system mechanism that prevents over-travel attempts, making itself safe.
  • It does pretty well in horizontal lifting job too.
  • It’s priced at an affordable zone for such value it provides.


3. Torin Big Red Hydraulic Bottle Jack, 2/4 Ton Capacity

Torin Big Red Hydraulic Bottle Jack, 4 Ton Capacity

Torin no. 2 on my list! Same name, same dependability. This is the 4-ton model we’re talking about this time. But be it the 20-ton model or 4, Torin bottle jacks have been up to the mark in terms of quality and value for money (except 1 or 2 models, like the 2 ton one, which is not the best in the class).


The jack has heat-treated extension screw that allows low pickup height adjustment and maximum lift height. The base is wide, rugged that provides stability and strength. It also shares a similar saddle design like the other model – serrated and heat-treated, for generous lifting area and secure grip.


The lifting mechanism is very smooth and effortless as well. You can lift up to 4 tons (8000 lbs) till 14-5/16 inches (its own minimum height is 7-½ inches, so the lifting range is 7-1/2″ to 14-5/16″).


The build-quality is equally excellent in this model as well. The weldings are very professionally done and it’s a strong jack overall. On top of that, all critical stress points of this jack are reinforced for added durability and dependability.


Highlighted features of Torin T90403B:

  • An effortless and smooth lifting mechanism holds the weight well.
  • Heat – treated extension screw helps to gain the minimum and maximum height easily.
  • The wide and rugged base provides strength and stability.
  • Can lift up to 4 tons and has a lifting range of 7-1/2″ to 14-5/16″.

So, this one’s also an inexpensive commercial grade bottle jack that performs up to the mark. The folks that don’t often need to lift bigger weights, might consider this model of Torin, it will save them some cash and satisfy their need at the same time.


4.Powerbuilt 640912 All-In-One 3-Ton Bottle Jack with Jack Stand

Powerbuilt 640912 All-In-One 3-Ton Bottle Jack with Jack Stand

Want to hear another trusted and famous name in tool industry other than Torin? Well, if you’ve dealt with tools before, it’s very likely that you’ve heard the name of Powerbuilt.


Powerbuilt Tools are Serious Tools for Serious Work. Their tools are built with the performance, features, fit and finish, and the Powerbuilt 640912 Bottle Jack is no different.


Firstly, the jack comes with a patented unique design that supports the overall lifting process very well. You’ll see that this jack has a wider base than most other bottle jacks. This helps to gain a lot more stability and strength to hold the weight.


The jack is made of high-grade steel and it is durable. The joints are very well welded. It is not expected to fail under pressure. To mention, Powerbuilt tools and equipment always meet or exceed ANSI standards and so is this jack.


Another safety feature of this jack is the safety lock bar, you can always lock in your jack after achieving your desired height. This gives extra confidence to you.


The jack has a lifting capacity of 3-ton or 6000 pounds. Its minimum height is 11 inches, so it’s not great for low profile machines. But if it fits under your vehicle, it’ll lift that up to maximum 21 inches confidently.


It’s great for any off-road vehicle, SUV, framing, construction jobs, floor joist jobs etc.


Highlights of the Powerbuilt 640912:

  • Wide base for added stability and strength.
  • Safety lock bar that locks jack at the desired height, gives more confidence.
  • 3-ton lift capacity with a lift range of 11 to 21 inch.
  • Patented unique design that supports lifting process.
  • One of the most reliable bottle jacks on the market.

5. Pro-Lift B-006D Grey Hydraulic Bottle Jack- 6 Ton Capacity

Pro-Lift B-006D Grey Hydraulic Bottle Jack- 6 Ton Capacity

Pro-Lift B-006D Grey Hydraulic Bottle Jack is a 6-ton bottle jack can be a Great Addition to any Garage and Home. This simple yet tough bottle jack is ideal for home, auto, truck service, farm and shop use. And it comes at good value-for-money pricing.


The jack has a strong steel lifting saddle which offers good traction and holds load securely. The areas that are likely to experience high stress are heat-treated for added durability.


The unit is well-built, feels very sturdy and it’s a strong bottle jack. Despite its high strength, the unit is lightweight, at only 12 lbs. So you get carrying convenience and move around with it. And it’s an easy-to-operate bottle jack as well.


Coming with the extension screw, it can be adjusted to accommodate desired work height. It has a lifting range of 8-1/2 to 16-1/4 inch and lifting capacity of 6 tons. So the minimum height of it indicates that it ain’t really ideal for low profile machines. Though it has lower minimum height than many other similar jacks.


The Pro-Lift B-006D also features Built-In bypass system to protect against ram over-travel. This makes the jack secure to work with. The jack also meets the latest ANSI/PALD Standards. You’ll feel safe to work with it.


The Pro-Lift B-006D Grey Hydraulic Bottle Jack, In a Sum:

  • 6-ton bottle jack that has a lifting range of 8-1/2 to 16-1/4 inch.
  • Has a built-in bypass system that protects against ram over travel for user safety and meets the ANSI/PALD standards.
  • Critical stress areas are heat-treated for added durability.
  • Easy-to-operate bottle jack.
  • Strong steel lifting saddle holds load securely.


Comparing how much it costs, and how much value it provides, it undoubtedly provides good value for money.


6. Torin Big Red Hydraulic Stubby Bottle Jack, 12 Ton Capacity

Torin Big Red Hydraulic Stubby Bottle Jack, 12 Ton Capacity

Torin again, man? You might be getting pissed at me right now! Why in the world I’ll keep suggesting Torin jacks? Because I can’t help it. Their products worth it. If you’re talking about hydraulic jacks, you just can’t avoid the name “Torin”.

Anyways, back to serious talk, the T91207 is a great little workhorse. These are great little bottles that don’t leak, like some of their sibling does.

The jack is smooth and makes your heavy lifting services easy and stress-free. It can lift 12 tons or 24000 pounds to 11 inches, with its minimum height being 7 ½ inches.

Saying that it’s good enough for regular machines with normal ground clearance. But for a sports car type low profile machine, it’s not ideal.

And it has a lifting range of 3½ inches, with the maximum height being 11 inches. It could be a bit more generous I guess. Though 11 inches is often enough to have a sneak peak underneath.

The cylinder is made of chrome-plated steel, so it’s durable. The glide-action pressure pump makes the lifting process very smooth as well, like other Torin jacks. The rest of the body is also made of high-grade steel, so it’s durable and meets the ANSI standard as well.

And with this bottle jack, you do not have to fear for your personal safety because it is fully tested for safety and reliability by Torin themselves, and I trust their words.


Highlighted Features of the T91207 Stubby Bottle Jack:

  • Made of heavy-duty steel, the cylinder is chrome plated and this jack is durable.
  • Safe to work with, this jack is factory tested for safety and reliability
  • It has a heat-treated saddle to hold loads safely.
  • Wide, rugged base like other Torin jacks for better stability.
  • The jack has a lifting capacity of 12 Tons and lifting range is 7-1/2 inch to 11 inch

7. Powerbuilt 647501 Heavy Duty 12-Ton Bottle Jack

Powerbuilt 647501 Heavy Duty 12-Ton Bottle Jack

Another contender for the place of ‘top rated jack’ from Powerbuilt, the big name, and a strong contender. Powerbuilt offers anything you need for heavy lifting in garage or shop and this time they’re offering this 647501 heavy duty hydraulic bottle jack that can lift up to 12 tons.


The jack features forged steel saddle and cast handle socket that lets you easily achieve the maximum working height you need. The extension screw on it provides added lift height. It can lift 12 tons or 24000 pounds maximum, probably more than enough for ya.


It has an oversized base made of heavy-duty cast iron. This takes the stability of this particular bottle to a whole new level. You’ll be impressed with the stability and confidence it provides while in use.


The bottle jack is very convenient and easy to operate. The lifting is as smooth as you want it to be. The pin style release valve mechanism on this makes the operation even easier. Again, the jack exceeds the tool standards of ANSI, so you can trust it to be safe.


Highlighted features of the Powerbuilt 647501 Heavy Duty 12-Ton Bottle Jack:

  • Oversized Heavy-duty, cast iron base for great stability.
  • Forged steel saddle along with cast handle socket makes gaining maximum height easier.
  • Extension screw for extra height lift
  • The operation is easy with Pin-style release valve.

This is one of the most reliable bottle jack on the market that comes with a reasonable price tag. One probably won’t regret investing on this.

8. Sunex 4913A 12-Ton, Short Bottle Jack

Sunex 4913A 12-Ton, Short Bottle Jack

Super short jack with a lot of lifting power. People who have read till this, got pretty impressed with some of the earlier mentioned jacks, yet can’t choose already because something they’re looking for in a jack is missing, might be looking for this jack.


If that ‘something’ is the quest for a low profile yet super powerful jack, then it’s the one for ya. The height of this jack is just right. Works great for all the situations. With a minimum height of around 6 inches, this jack fits under most of the low profile cars, trucks, and other low profile machinery.


It can lift up to 12 tons for 4 inches or so, which is enough for most cases, but I thought a bit more would be more helpful.


It has a ductile iron base that provides better stability. The whole body of this jack is covered with electrostatic paint that prevents rusting. The build material is high grade still and joints are well welded too, so you can expect good longevity overall.


The Hydraulic bypass mechanism on the jack prevents overextension or ram. It also has a Two-piece slip fit handle for pumping the jack and controlling the release valve.


This model includes a grab handle for carrying the jack as it is on the bit heavier side. The handle could be better designed, but it’s functional nevertheless. At least it’s a feature that most jacks don’t offer.


Highlights of the Sunex 4913A Short Bottle Jack:

  • A low profile jack, suits latest sports cars, trucks and other machinery with low ground clearance.
  • Short, but powerful jack.
  • Can Lift up to 12 tons for 4 or so inches.
  • Heat treated extension screws to get full use of ram travel
  • A solid ductile iron base for improved stability.
  • Has a grab handle for carrying convenience.


9. ATD Tools 7385 Short Hydraulic Bottle Jack – 12 Ton Capacity

ATD Tools 7385 Short Hydraulic Bottle Jack 12 Ton Capacity


Talking about low profile hydraulic bottle jacks, here’s another one. Another short, powerful bottle jack, from ATD Tools this time. A very robust and usable jack with a minimum height of 6 inches to fit all low profile machines of yours.


The jacks start lifting at 6 inches, and goes till 10-5/8″. You can play with the height with extension screws. And it has a lifting capacity of 12 tons. Means it can lift any machine under 24000 lbs for around 4 inches, cool enough for such a little guy.


ATD Tools have under promised about the versatility of this jack. Though they mention it’s for vertical use, this little guy works sideways, upside down, upright, at an angle etc. They also can be used for multiple purposes like spreading, lifting, etc. Little beauties!


For construction quality, it seems very solid, sturdy and reliable and with a little care will likely be lifting stuff 50 years from now, haha! And like the Sunex 4913A, this jack has a nice little carrying handle which makes carrying easier.


Lifting massive weights with this jack is a piece of cake for its smooth mechanism. Much much easier comparing to many other jacks out there. The pumping action is super smooth, but you might need to pump more times, though! That’s just the nature of the beast.


Highlights of the 7385 Short Low-profile Hydraulic Bottle Jack:

  • Short, low-profile, powerful beast.
  • Has a lifting capacity of 12 tons and a lifting range of 4 or so inches.
  • A versatile jack, can be used for many purposes, in many ways.
  • High-quality material, great construction.
  • Smooth to operate, lifting weight is bliss.


10. Strongway Hydraulic High Lift Double Ram Bottle Jack

Strongway Hydraulic High Lift Double Ram Bottle Jack

To end the list, I’m gonna finish with another low profile jack, this time from “StrongWay’. This is one of the best low profile bottle jack, could be ‘the’ best as well. I’ll tell you why –


Firstly, it is what real low profile for a bottle jack is. This gets as low as 5 inches, an inch less than the other 2 jacks I just discussed. This little dude is low profile enough to take a sneak peak underneath low profile cars like Prius C, Coupes, Yamaha rhino etc.


We’re talking about real low profile stuff where the numbers are already small, so sometimes even an inch could matter to reach the perfect lifting point under your machine.


Secondly, it goes up to 14 and a half inches, so it has a lifting range of over 9 inches, which is very generous and almost double than the previous 2 little guys. Starting off very low and extending to higher reach, isn’t that what you want from a low profile jack?


Now comes lifting capacity. It can lift 2 tons or 4000 lbs. Well, way lower than the previous 2 powerful dudes that could lift 12 tons. But, I feel that much lifting capacity for a low profile bottle jack is overkill.


Take the Prius C that I mentioned earlier, weighs about 2500 lbs, the Rhino weighs around 500 lbs, and other low profile cars or machines weighs pretty same to these. So 4000 lbs are supposed to be enough if you are really talking’ about low profile machines.


For other features, the large diameter hydraulic steel cylinder on it reduces oil pressure needed to raise the load which helps reducing wear and extends its service life.


It is built solid as well, should give you many years of service. Being constructed of high-grade steel, it is built to exacting standards for quality and durability.


On top of that, it gets a lead-free paint finish after putting it through a chemical wash to ensure a long-lasting finish and to help prevent rust. And the paint finish is resistant to grease, oil, and dirt, so you’ll have an easy time cleaning the jack.


Highlights of the Strongway Hydraulic High Lift Double Ram Bottle Jack:

  • Real low profile gets as low as 5 inches and can go as high as 14 inches.
  • Capable of lifting 2 tons or 4000 lbs.
  • Large diameter hydraulic steel cylinder reduces oil pressure and extends longevity.
  • Made of High-grade still that ensures durability.
  • Covered with lead-free paint to avoid rust, which also makes it resistant to grease, oil, and dirt, so cleaning is easy.


To sum up, I should clear a thing. I compared with earlier 2 low profile jacks, does that mean it’s the only low profile jack you should count? Well, it’s better from some aspects, but also note that it comes at a pretty higher price tag than the other 2.


And, not all the time, you’ll need to go below 6 inches, you know your machines, so other 2 will do fine in those cases. Next, you generally won’t need to go beyond 2 tons, but again, you know your machines, so if you need so, consider one of the earlier 2 little dudes!


But, if these are not the cases, if you don’t need to go beyond 2 tons, and if you want an ideal low profile bottle jack that gets low and high enough, and you’re willing to spend the money, this probably is the best low profile jack to buy.


Picking out the Best Bottle Jacks: What You Should Look For in a Bottle Jack!

Deciding what you’ll be using a particular tool for before you purchase is the key to get the most out of a tool or any other thing for that matter. When buying a bottle jack, the mistake many tend to do is they get impressed by all the fancy big numbers of a tool, spends more on that and ultimately finds that tool is a overkill for their need.


That said, let me make it simple on how to take the decision about which bottle jack to buy!


How Much You Need To Lift?

What’s the heaviest machine you’re gonna lift and how much it weighs? Try to pick a bottle jack that has more lifting capacity than your cars’ or machines’ weight.

That said, when a jack lifts your car, it generally has to carry 60% weight of your car. Still, I recommend going further than the 100% weight of your car, to be assured and confident.

For that matter, the sedans usually don’t weigh much, and a 2-ton jack will take care of most of the sedans. If you have a truck or heavier vehicle, buy a jack with bigger lifting capacity, according to your vehicle’s weight.


Height/Ground Clearance of Your Car

You need to make sure that the jack can go underneath the desired lifting point of your car.

Measure from the frame to the ground on your vehicle. And don’t cheat in the measurements, while there’s plenty of uses for a bottle jack around the home, they’re not going to vehicle lifting job efficiently if they don’t fit.

Bottle jacks are a bit taller than a floor or scissor jacks. While it can be considered as a disadvantage to them, they provide better support and provides more confidence in lifting. So, if you can find a jack that fits underneath your car well, you’ll be happier with it.


Build-Quality, Material of the Jack:

It’s important to be assured that your jack won’t fail or break apart during operation. That, you can know by judging the build quality of the tool.

The first thing to consider is what material it’s built from. High-grade still makes tougher and durable jacks.

Another thing is the weldings at the joints. Those need to be strong. If you don’t have the chance to check the tool by hand (if you shop online), then you can have an idea about the build quality of a particular model by checking out user reviews, or reviews from my blog, I cover everything!

Another thing is like any other steel products, bottle jacks are prone to rust. While rust won’t kill a bottle jack, but in the wrong places, it can cause the jack to run a bit rough or take more force to be used. So jacks having various paints and alloy coatings like chrome will do better regarding this perspective.


The smoothness of Operation and Other Little Things:

Many jacks works smoothly in the lifting process, many don’t. You want to make sure that it does its main job efficiently and smoothly, not taking much energy of yours. Make sure that the release valve isn’t too awkward.

As a general rule you are not supposed to be under a vehicle when you lower it, so make sure you’re able to reach the jack’s release valve from a position next to the vehicle. It’s very important.

Some jacks have convenient options like carrying handles and other stuff. If you have this on your jack, life will be a bit easier.



Renowned brands tend to ensure quality. So if you can buy a jack that has a reputed name tag on it, that is ensuring. All the brands I mentioned above in bottle jack reviews section, are reliable and known for providing good service.



Last but not least, price! Don’t always judge a product by the price tag. Sometimes inexpensive jack will provide great service, sometimes an expensive one might disappoint you. So judge by specifications and quality of a jack, not by price.

Find the quality bottle jack for your needs, and you’ll never have to worry about a flat or brake job again. You’ve now got something that will easily get that wheel off the ground, helping you with the repair.


How To Operate a Bottle Jack Properly – Easy Instructions:

If you are not very familiar with using bottle jacks, and wondering how to operate them properly and safely, let me help you –

Step #1. Place the bottle jack under the car

Have a look at your car manual to find out the correct position. Make sure the place/surface you’re putting it underneath, is sturdy and flat unless you need to lift any cylinder-shaped place. For those cases, there are bottle jacks with extension screws that have such design on the top that suits those shapes.

Step #2. Wind up the extension screw and fit under the lifting point

Once you’ve found the suitable place to lift your car from, wind up the extension screw until it touches or comes close to the lifting point.

Step#3. Lock the valve

The valve is present at the bottom part of the jack. Use the collapsible handle to turn it clockwise until it gets fully tight.

Step #4. Pump the jack

Insert the handle in the handle sleeve, then pump it in order to raise saddle to contact the lift point. Keep pumping until you get the desired height.

Step #5. Release the pressure

Once you’re done with the purpose of lifting your car, use the handle to turn the valve anti-clockwise to release pressure. Go slow on this process, turn the valve slowly thus the car will land softly.

The job has done. Clean the jack with a piece of cloth if needed.


Bottle Jack Reviews, Last Words:

Is there anything that you don’t know to pick the best bottle jack for your need? I say, NO! With confidence. With so much information, you yourself are now close to an expert to judge a bottle jack, congrats!

I believe you’ve already determined which is going to be your next bottle jack that will serve your purpose perfectly. One thing I can assure you, you don’t need to look further for even more options, you’ll only get confused.

These 10 bottle jacks are on my list after lots of research. I’ve spent countless hours, researched, and thought from the different perspective, considered various needs to pick these top 10 bottle jacks. They all surely provides good value for money. Investing on any of these you’ll not regret.

These bottle jack reviews are done after collecting data from authentic sources, and with my experience. They’re unbiased, I am not promoting any manufacturer, I’ve no reason to do so.

If you still think you lack any information, ask me in the comment section below, I’ll be happy to help.


Thanks for reading. Cheers!

The Best Oil Filters on the Market Today

Having a car is extremely important to most people’s lives, whether it be for getting to and from work, picking up the kids from school, or taking you to your favorite destinations. Since having a car is important, isn’t it also equally important to keep your car running as well as possible? Using quality parts like great brake pads, the best oil filters, and top of the line fluids are essential to this.

When it comes down to the best oil filters, it’s hard to decipher which ones are not only the best bang-for-your-buck, but also which one is going to last the longest and keep your engine running as best as it can. There are so many factors that make a big difference when deciding which oil filter is right for you.

Since the filter should last you at least 3000 miles, you’re going to want to pick the most efficient one possible, so to lose the confusion we made you a guide to the best oil filters on the market today, and how to decide which one is right for your car!


Why is a Great Oil Filter So Important?


It doesn’t matter how great of quality your engine oil is if you don’t have a great oil filter for it. Why is this? Well, the essential function of the filter is in its name, filtering oil. If any abrasive particles end up in the oil that circulates through the engine, it can easily damage and pre-maturely ware parts of your car’s engine.

That means that having the best oil filters can mean the difference between having to replace engine parts at 60,000 miles or 120,000 miles. The less abrasive particles that end up circulating in your oil, the longer your engine will run smoothly as it is intended.


How Do I Know I Need to Replace My Filter?

Keeping track of differences in the performance of your car is super important to keep it running great. You should always stay aware of signs and symptoms that your car isn’t running the way it should be, like your steering wheel shaking when you break, or if your car pulls to one side or the other.

There are several warning signs that it may be time to get a new oil filter, those include:

  • Your engine performance starts suffering
  • Loud metallic sounds coming from your engine bay
  • Noticeable sputtering and misfiring sounds
  • Loss of oil pressure
  • Black or ‘dirty’ exhaust

If you are experiencing any or all of these signs, it’s time to replace your filter, waiting can mean some serious damage to the engine. Now that you know that you need a new oil filter, how do you know which one to pick?


Top Five Best Oil Filters on the Market


The following filters are based on three main components: price, how long they last, and percentage of efficiency.

5. Fram PH7317 Extra Guard Passenger Car Spin-On Oil Filter

Fram PH7317 Extra Guard Passenger Car Spin-On Oil Filter


If you are looking for something that isn’t going to break the bank but is going to give you optimal performance, look no further than the Fram PH7317.

This is one of the best oil filters on the market right now because of its affordability paired with install ease, great ability to reduce dirt entering the engine, and it’s longevity.

The Fram PH7317 has a proven 95% efficiency and is going on the market for around $4.99.

4. ACDelco PF2232 Professional Engine Oil Filter

ACDelco PF2232 Professional Engine Oil Filter


Aside from its awesome blue paint job, the ACDelco PF2232 has a whopping 98% efficiency in dirt-blocking. It’s known to have a great fit, proficient durability, and can last for up to 12,000 miles.

This is great for anyone looking for longevity as well as a great performance of the oil filter. It does cost a little bit more, but is definitely still quite affordable compared to other top brands, running around $6.99.

3. Royal Purple 10-2835 Extended Life Oil Filter

Royal Purple 10-2835 Extended Life Oil Filter


If you are looking for a great heavy-duty oil filter, this is one of the best oil filters on the market right now. It has a thick outer casing, as well as the ability to withstand heavy oil flow.

With a 99% efficiency and a longevity of 10,000 miles, this is one of the top-rated oil filters on the market today and is definitely going to exceed your expectations. It has great ratings as far as optimizing oil flow and reliability.

The only reason this filter didn’t land that second or first spot on this list is that of its price, running customers a whopping $14.99 for one filter. If you’re willing to sacrifice price for one of the best oil filters, however, this could definitely be considered one of the top out there today.

2. Bosch 3330 Premium FILTECH Oil Filter

Bosch 3330 Premium FILTECH Oil Filter


This oil filter has pretty much everything to offer, a great price with a quality that is hard to beat, as well as longevity, durability, and availability. It has an unbelievable 99.9% efficiency rate, which is going to ensure the cleanest oil is running through your engine.

On top of that, it covers a larger surface area, which contributes to its high-efficiency rating. Going for about $5.60, it is certainly an amazing deal for such an affordable price. If you want something that is well trusted, highly recommended, efficient, and easy on the wallet, the Bosch 3330 is most definitely going to satisfy all of your needs.

1. Mobil 1 M1-110 Extended Performance Oil Filter

Mobil 1 M1-110 Extended Performance Oil Filter



Most anyone that you ask will tell you that the Mobil 1 M1-110 is one of the best oil filters available, if not the best oil filter. This doesn’t come as much of a surprise, considering that Mobil 1 is regarded as the best synthetic oil manufacturer around.

Also keeping a 99.9% efficiency, this oil filter is durable, long-lasting, and extremely strong. It has one of the highest capacities of filters on the market, 28 grams. It is a bit more expensive, costing buyers around $11.99, but the price is more than matched by efficiency, reliability, and quality of parts.

Longevity is great with this filter as well, leading the market at an estimated 15,000 miles before a recommended change. If you were searching for the industry leader, this is the oil filter for you.


How to Pick the Right One for YOU

All of the filters on this list are the best oil filters available today, so one isn’t necessarily the best for everyone. For some, it’s more important to find affordability in a filter, whereas others would consider longevity ahead of price. Almost all of the filters have an efficiency of 98% or higher, so you aren’t going to have to worry about finding great quality on any of these filters.

Consider what is most important to you, as well as which filters may be recommended over others depending on the make and model of your vehicle. All of these filters work for almost all cars, but there are filters out there that may work better than any of these if you have, say, a Ford, Mercury, or Lincoln.

Once you come to a conclusion about what you are looking for and what is going to work best for your specific vehicle, you have the tools available here to pick the best filter for you.

For more information about the best parts, and when it’s time to replace them on your vehicle, check out some of our reviews and blog, or contact us with questions about your vehicle.

Best Car Ramps Reviews and Buying Guide 2018:High,Tall,Steel,low profile Car Ramps

Car ramps are mechanical devices that are used for lifting up your car so that you can have an opportunity to carry out various repair works underneath the car. There are several reasons why car ramps offer an ideal solution as compared to other devices such as steel floor jacks. First and foremost, car jacks and steel floor jacks are not the best solutions for lifting very heavy vehicles and as such, one might not be very confident using these devices with their cars. In addition to that, the two alternative devices are not very stable and as such, the car might not be properly anchored in place for you to work on. This is why you should consider using a ramp instead. A car ramp is a much better device on account of its higher weight tolerance capability that can allow you to comfortably work on vehicles as heavy as 4000 pounds.

One of the biggest challenges that you might encounter when selecting a car ramp is the fact that there are indeed many car ramps out there. Be that as it may, one might not be in a position to select the right ramp for their cars. It is indeed very important to ensure that the ramp you purchase is one that is actually best suited for your vehicle. One of the most important things to consider while looking for a good ramp is the weight of your car. This is due to the fact that ramps come in different weight categories and you must ensure that the ramp you select can actually handle the amount of load you put on it. In addition to the weight, you must also have adequate knowledge on the different products available in the market so that you are in a position to make an informed decision. These articles will discuss some of the best car ramps out there.

Some of the best car ramps available on the market today include:


Race Ramp RR-56

Nicky Nice Solid Steel Auto Ramp

Scepter 08226 Plastic Automotive Ramps

Rhino Gear 11909 ABMI 


5.Race Ramp RR-56-2: Perfect Race Ramps Car Lift

Race Ramp RR-56-2The Race ramp RR-56 is indeed one of the best products out there. The product measures 56 inches offering adequate ground clearance to allow you enough space to work underneath your car. The Race Ramp also features additional straps that make it easy to handle the device while it is not in use. One of the most important things to note is that the Race Ramps are ideal for lifting the front side of the car and as such, this ramp makes it easy for you to carry out repairs on the front side of the car.


Check Price & Full Details


Race Ramp RR-56-2 proThere are several features of the Race Ramp RR-56 that make it an ideal solution for your car lifting purposes. First and foremost, the surface of the ramp offers enough grip to prevent skidding. This serves to enhance the overall safety of the user while working with the device. One of the most important things to consider while selecting an appropriate ramp is the stability of the device. A good product should be stable enough to enable it handle the weight of the car. One thing about the Race Ramp is the fact that it features a 100 percent sold style design that enhances the overall stability.

Portability and ease of use is also an important aspect that one must take into consideration when selecting an appropriate ramp. The RR-56 has straps that make it quite easy for you to lift the devices and serves to enhance the overall portability of the product.

Finally, despite the fact that the RR-56 can support a significant amount of weight, the ramp set itself is quite light. The total weight of the ramp is 20 pounds and this means that one can easily move around the device with significant ease.



There are several drawbacks with respect to the Race Ramp RR-56 with the first one being the fact that it can only be used to lift either the front or rear end of the car at any one given time. This therefore implies that you cannot lift the entire car at any given time. Secondly, the RR-56 is mainly used for light and medium car lifting purposes and such, is not ideal for heavy cars.


4.Nicky Nice Solid Steel Auto Ramp: Best steel car ramps

 Nicky Nice Solid Steel Auto Ramp

Check Price & Full Details

In addition to the Race Ramps, the second type of best car ramps that might be ideal for your car is the Nicky Nice Solid Auto Ramp. The Nicky Nice is ideal for lighting heavier cars due to its overall design and construction. Furthermore, the ramp also has a much higher ground clearance than many other products in the market.



There are several specific attributes of the Nicky Solid that make it ideal for various car lifting jobs. To start with, the ramp is completely made up of steel and this serves to enhance their overall durability. Secondly, the Nicky Soli is ideal for repair works that require a significant amount of space due to the fact that the ramps offer a higher ground clearance of up to nine inches. The storage requirement of the ramp has also been put into consideration with respect to the design of the Nicky Solid. The ramp features a full compact design and this implies that their equipment requires very little in terms of storage space.

The fact that the Nicky Nice is made up entirely from steel implies that in addition to enhancing durability, the product can also support a lot of weight and this is why the product can be used with cars weighing more than 6000 pounds. Furthermore, at only 15 pounds per ramp, the Nicky Solid is quite light and can easily be carried around while being transported from one point to another.



The Nicky Solid is indeed impressive equipment but the one negative thing that perhaps one must consider with respect to the use of the product is the fact that they are not optimized for light vehicle lifting.


3.Rage Powersports 6009-V2: Best high car ramps

Rage Powersports 6009-V2

Check Price & Full Details

The Rage Powersports is made up entirely of reinforced plastic that is designed to make it stable enough to handle the heavy weight of automobiles. The Powersports is essentially a low-profile equipment designed to offer low ground clearance. The Powersports is ideal for facilitating light repair works and also for medium vehicle lifting purposes.


Pros associated with Rage Powersports 6009-V2

Some of the main positive attributes of the Rage Power sports include the fact that the ramp can be used for both low and medium weight lifting purposes. Precisely, the ramp offers support for weights of up to 4400 pounds making it ideal for lifting most personal and family cars as well. In addition to that, the equipment’s stability is also enhanced by the fact that the equipment features additional tore-stop ends to ensure that the vehicle is indeed stable while one is working on it.

The use of reinforced plastic is also an important attribute that has served to improve the overall durability of the product. Reinforced plastic unlike conventional plastic is quite sturdy and can actually last much longer as compared to many other materials out there. Furthermore, the construction material also makes the product quite lightweight and portable.



One of the main drawbacks with respect to the Rage Powersports is the fact that it offers a ground clearance of only 2.75 inches. This, therefore, implies that the equipment can only be used for lifting low profile cars. Furthermore, the limitation in terms of ground clearance also implies that when working with conventional profile cars, one can only carry out light repair works when using the Rage Powersports.


2.Scepter 08226 Plastic Automotive Ramps: Best low profile car ramps

Scepter 08226 Plastic Automotive Ramps

Check Price & Full Details

Another plastic car ramp is the Scepter 08226 Plastic Automotive Ramps. Just like the former, the Scepter 08226 Plastic Automotive Ramps is also made up of reinforced plastic and it is particularly designed for heavy car lifting purposes. The ramp is indeed considered one of the best scepter car ramps in the market toady especially for heavy weight lifting purposes. It is also important to note that, the fact that the ramp is made of plastic does not in any way undermine its capability.



There are several advantages that the Scepter 08226 Plastic Automotive Ramps has over many other ramps available on the market today. First and foremost, the equipment is one of the best products out there for heavy vehicle lifting. Precisely, the ramp can support up to 12000 pounds on each side making it ideal for both medium and heavy vehicle lifting purposes.

Ground clearance is also another impressive attribute that the Scepter 08226 Plastic Automotive Ramps has over other ramps. The ramp offers a clearance of more than 6 inches and this is enough clearance for most repair works. Finally, the ability of the car is also enhanced by the use of plastic stops at both ends to prevent any instances of unwanted motion.



The main disadvantage with respect to the Scepter 08226 Plastic Automotive Ramps is the fact that they are not optimized for low profile lift jobs.


1.Rhino Gear 11909 ABMI Car Ramp:Best seller Rhino Car RampsRhino Gear 11909 ABMI Car Ramp

Check Price & Full Details

The fifth ramp that can work quite well with most cars is the Rhino Gear 11909 ABMI Car Ramp. The Rhino Gear is considered a versatile product on account of its ability to be used with many different types of cars. The ramp is also constructed from plastic making it quite easy to carry around and transport from one place to another.



One of the core advantages of the Rhino Gear is the fact that it can be used to lift cars that weight up to 12000 pounds. This, therefore, implies that you can use the ramps for most lift jobs since many cars and even trucks fall within this weight range.

Furthermore, it is important to point out the fact that since the Rhino Gear 11909 ABMI Car Ramp features a 100 percent plastic construction, you will not have to worry about issues like rust that can eventually affect metal ramps.

The fact that the Rhino Gear 11909 ABMI Car Ramp is made up entirely from reinforced plastic implies that the ramp is indeed very durable and you cannot use for many years without having to worry about any issue of damage.



In terms of its downsides, there are not many to speak of. However, the Rhino Gear 11909 ABMI Car Ramp does not offer support for wide tires on account of its limited width. This implies that the equipment can only be used with cars whose tires are less than 9 inches wide. In addition to the width limitation, another important drawback with respect to the Rhino Gear lies with its ground clearance. Precisely, the ramp is primarily designed for low ground clearance and this sort of limits the nature of repair works that one can engage in.


Conclusion: Best Car Ramp

In a nutshell, all the aforementioned ramps are indeed high-quality devices that can be ideal for your car lifting needs. However, it is important to ensure that you are in a position to identify a car ramp that best suits your car. There are several issues that one must take into account when selecting the best car ramp with the first being the weight of the vehicle. If the car is quite heavy, then the best option would select ramps that are able to handle higher amounts of weight such as the Nicky Nice Solid Steel Auto Ramp or the Scepter 08226 Plastic Best Automotive Ramps. Furthermore, you should also take into consideration the ground clearance that you require from your car. If you need to conduct extensive repair works, then you should go for equipment with high ground clearance such as the Rhino Gear 11909 ABMI Car Ramp.


Guide: Choosing the Right Jack Stand For You

best jack stand

If you like to work on your car, then you know that minor mishaps occur from time to time. A skinned knuckle, a minor burn, or a pinched finger can certainly be painful. But they aren’t life threatening.

In fact, most of the time it’s just a lesson learned. Next time you’ll look down at your hand and remember not to do that. However, it’s best not to forget that more serious injuries can occur.

It doesn’t take a trained mechanic to know that working under a jacked up car can be dangerous. An accident involving your jack stand can land you in the hospital or worse. So it’s a good idea to be working with the right one.

Here are some things to think about while choosing the right jack stand for your needs.

Why Use A Jack Stand?

First, let’s cover the basics. A jack stand is an adjustable mechanical structure that supports your car while it’s lifted. It’s not to be confused with a standard floor jack.

Floor jacks are great for getting your car off the ground. They’re not as great for ensuring that it doesn’t come back down on top of you.

A cheap jack, or a hydraulic floor jack that begins to lose pressure can be an accident waiting to happen. Even if you aren’t getting under your car, you should still use a stand.

The reason is that a floor jack only provides one point of contact between your car and the ground. That can actually make it somewhat unstable. If your vehicle falls or tips over, you’re likely looking at unnecessary damage.

A jack stand provides multiple points of contact to keep your vehicle supported and avoid tipping. Once your car is lifted, you place the stands underneath it to ensure that it won’t be coming back down.

What To Think About When Buying

So you know you need jack stands. What should you look for?

First and foremost, think about what type of vehicle you’re using it for. As you may have guessed, a heavier vehicle is going to need a stronger stand. Your Ford Explorer will likely need a different stand than a Miata.

Depending on what you need, you might want to look at stands that are rated for two tons all the way up to six.

Also, remember that the height of the stand is of equal importance. A car that’s very low to the ground won’t need the tallest jack stands possible. But that Explorer we just mentioned is going to need taller stands to reach the bottom of the vehicle once it’s been lifted.

Next, you want to take into account the quality of the stands you’ll be using. Typically speaking, a cheaper jack stand may be more attractive now, but it probably won’t last as long.

Look at the finish and the fit of the jack stand. Corrosion is going to be a big enemy when it comes to keeping your stand in working order. If the finish is uneven with cracks or gaps, you should probably pass. It’s just not going to last as long.

Also check out the welds. The weld beads need to be even if you want a stand that’s going to last you. Of course, you may not have the time or ability to go check out jack stands. That’s why most of us rely on reviews.

Some Well-Reviewed Stands


Torin 3 Ton Double Locking

The Torin “Big Red” stands are well known as quality stands that you can trust. They have a three-ton capacity and a maximum height of 16 inches. That makes them useful for sedans or economy cars.

They also have a self-locking ratchet and come with a secondary pin to give you added peace of mind while under your car.

Wilmar 6 Ton Heavy Duty

These are the stands for you if you’re working on something a little heavier. Or a lot heavier. They’re rated up to six tons and have a maximum reach of 23.5 inches.

Remember though, they also have a pretty high minimum reach at 15.5 inches. So they might not be able to do double duty with a much smaller car with lower clearance.

But if you’re working on an SUV or truck that needs the weight capacity, you shouldn’t have any clearance issues.

Jack Stand Safety Tips

Before we go, we want to leave you with some safety tips for working with stands.

Always Use A Jack Stand

The simple truth is that you can’t trust your standard floor jack to hold your vehicle up for you. The moving parts of a floor jack can wear down over time. You don’t want to find out their condition the hard way.

Lift your car up with your floor jack, keep it up with your stands.

One Stand Per Wheel Off The Ground

This is a pretty standard rule that should keep you safe and happy. For every wheel that’s off the ground, add a stand to support the vehicle. You want the maximum stability that comes with four points of contact with the ground.

Use The Right Jack

For the utmost safety, it’s a good idea to use a jack that’s rated for double your vehicle’s weight. If your car is two tons, then try to get jack stands rated to four tons. It might sound like overkill, but it’s an added safety factor, especially if your car is off balance when lifted.

And keep an eye on what the capacity rating says specifically. Does it say that one stand is rated for that amount, or that the pair of them are? That’s an important point.

Also, keep in mind your vehicle’s height and which stands will accommodate it. Never try to make something work that isn’t quite right.

Ready To Choose A Stand?

Now that you’ve got an idea of what you might want, why not check out some more reviews? Best Floor Jack Reviews is your one stop shop for everything related to jacks.

Have any questions? Contact us today and we’ll get you the answer you need!

The Best Floor Jacks for Cheap

best floor jacks

Car maintenance can be a pain. Especially when you consider all the unexpected costs.

That’s why many car owners are taking matters into their own hands by performing their own maintenance.

Floor jacks are one of the best investments you can make for your car. It’s a crucial piece of equipment that can help you do everything from changing your oil to cleaning the engine bay.

You need to find a floor jack that is safe, reliable, and also affordable.

But how do you find a good deal on floor jacks? It’s easier than you might think.

Here is a guide to buying the best floor jacks for cheap. I’ve broken down the best jacks on the market for the penny-pinching soul. Read on to learn more.

Types of Floor Jacks

Before I dive into the best brands and models, I need to give you some basic information. There are three main types of floor jacks that you will be choosing between.

The first is a hydraulic floor jack. This is one of the best floor jacks because it requires hardly any effort to use.

The hydraulic jack uses pressure to generate force. It has two cylinders that are connected. Force is applied to generate pressure to lift the car. The hydraulic jack is a cost effective jack because it uses oil instead of hydraulic fluid.

The next floor jack is a scissor jack.  In order to use this jack, you have to turn a small crank to lift the car off the ground.

This is a popular type of jack because it’s small, portable, and cheap. However, using it requires a lot of effort.

The final type of floor jack is the bottle jack. These are similar to hydraulic jacks but are placed upright instead of on its side.

It’s a much larger jack that can lift over 50 tons, but it also requires a large amount of clearance space for usage.

What to Look For

You might be tempted to buy the cheapest floor jack you can find. However, there are several different factors you should consider before making a purchase.

The best floor jacks need to be tailored specifically for your car. You need to consider the type of vehicle, the weight of your vehicle and the lifting speed.

The most important thing to pay attention to is the weight of your vehicle. All floor jacks have a maximum weight capacity. To protect your safety, you need to be very careful that your car doesn’t exceed that amount.

The best floor jacks can comfortably hold weights between two to three tons. This is ideal for the average car owner as most cars weigh around 4,000 pounds.

Keep in mind that the goal of a floor jack is to lift a part of the car. Still, you should seek out floor jacks that exceed your car’s weight for safety purposes.

Small car owners should look for two-ton jacks while large car owners should look for three-ton jacks. There are also four to five-ton jacks available for heavier vehicles.

Most floor jacks are either made from aluminum or steel. Aluminum jacks are light, easily transportable, and hold massive amounts of weight. Steel jacks are heavier but are generally less expensive.

The best floor jacks require anywhere from five to 10 pumps to lift a car. These jacks can save you tremendous amounts of effort in lifting.

Inexperienced users should look into how to use a floor jack before making a final purchase.

In general, quality floor jacks cost anywhere from $150-$250. Here are a few of the best floor jacks under that price.

Torin T82751 Pro Series 5500 Heavy Duty Floor Jack

Torin T82751 Pro Series 5500 Heavy Duty Floor Jack

You don’t have to spend a fortune on a quality floor jack.

Instead, consider purchasing the Torin Pro Series Heavy Duty Floor Jack. This jack has a large load bearing capacity of over 2.75 tons.

That means it can comfortably lift most larger cars and trucks. It also has a built-in safety overload system – meaning it won’t allow usage from cars over weight capacity.

It also has a large lifting range of 5.12-inches to 19.3-inches. The floor jack includes steel casters with 360-degree swivel ability. This gives you maximum room to work with while under the car.

This is a heavier floor jack weighing in at over 75 pounds. But it’s one of the best two-ton floor jacks in its price range. It typically runs between $100-$130.

Liftmaster Hydraulic Trolley Floor Jack 2 Ton Heavy Duty Car Lift

Liftmaster Hydraulic Trolley Floor Jack


It’s hard to find a cheap floor jack that is user-friendly, easily transportable, and inexpensive.

But most floor jacks aren’t like the Liftmaster Hydraulic Trolley Floor Jack. This is one of the best floor jacks for people on a budget – costing between $30-$50.

The Liftmaster weighs in at only nine pounds but can still bear two tons of weight. It has a 360-degree swivel saddle and heavy gauge steel frames. It’s also roughly half the price of similar floor jack models.

The downside is the lift height range is limited to five to 13 inches. This creates some constraints, but it’s hard to pass on such a great deal.

Torin T83006 Big Red Steel SUV 3-Ton

Torin T83006 Big Red Steel SUV 3-Ton

Do you have a heavy car or truck? You’re in luck.

The Torin Big Red Steel SUV 3-Ton is easily able to lift large cars, SUVs, and trucks with minimal effort. It also only costs between $60-$70.

This is one of the best floor jacks on the market for three-ton vehicles. It’s a 49-pound high-grade steel jack that is built for durability.

It also includes a locking safety release, a large saddle surface area, and swivel wheels. The lift height also exceeds 20-inches.

This jack is compact, easy to use, and strong. It may require a lot of pumping, but it’s a small price to pay for a cheap and reliable jack.

Best Floor Jacks

The best floor jacks don’t have to be expensive.

These jacks are all sturdy, easy to use, and fit for a wide range of vehicles. You can save yourself some money while fixing up your car by purchasing one of these quality jacks.

Are you interested in learning more about floor jacks? We’re here to help. Check out our buying guide to find the right jack for you!

Alltrade Powerbuilt 620422E Heavy Duty Triple Lift Jack Review

Finding a good heavy duty jack can be difficult. There are many different things to consider. For such an important piece of equipment, you want to make certain that you’re buying the best one for the job.

Recently the Alltrade Powerbuilt 620422E Heavy Duty Triple Lift Jack has come to the forefront of mechanics and car enthusiasts everywhere.

With its strong lifting power and its affordable price, it’s no mystery why.

We’ll be going through this tool together, so you can see for yourself if it is the right choice for your needs.

Powerbuilt 620422E Heavy Duty Triple Lift Jack Review




  • 4,000 lbs Lifting Capacity
  • Removable Padded Rails
  • Can easily lift cars, trucks, ATVs, and more
  • Removable Lift Saddle
  • Tie-down loops that have been welded into place
  • Secure locking bar for extra safety
  • Stable
  • Durable
  • Flexible Design
  • Meets ANSI Standards



  • Versatility

This triple lift jack is a great versatile choice for a number of different activities. It works with a bunch of vehicle varieties. This means don’t have to worry about needing a specific lift for one project and then having to switch it for another later on.

It can be used to remove transmissions and other kinds of mechanical work with no hassle to you at all. It is able to lift up to 4,000 pounds of weight with ease.

The triple lift function allows this jack to be flexible. It can adapt to most anything you try to throw at it.

  • Extra Safety

This jack comes with an added security bar to keep you as safe as possible.

This bar locks into place after you’ve lifted the jack up into position. This bar lets you feel certain you’re in no danger of it falling while you’re working. Adding that to the already stable design makes it very secure while in use.

You won’t even need to rely on extra jack stands to keep it in place. All you’ll need to worry about is pulling out this single tool. Then, you can get straight to work. It makes things a whole lot easier for you.

A lot of other jacks don’t come with this extra-safety measure. This leaves mechanics feeling a little uncertain as to whether or not the jack will buckle and the vehicle frame above them will come crashing down.

But this triple lift jack has your safety in mind and allows you to work in peace.

  • Durable

It has been made to last. All you need is to employ proper maintenance and care, and this jack will last you for years to come. When in use, it feels stable and strong. This also contributes to its long-lasting appeal.

  • Patented Design

This jack is unique in that it allows you to remove the padded lift rails and the lift saddle. This means it can work with different vehicle frames with ease. This gives you a lot more freedom to do a variety of different jobs that other lift jacks can’t compete with.

  • Price

For everything that this jack can offer and do, the going asking price to purchase it is a steal. Compared to other similar jacks in the same price range, you end up with a whole lot more features with this triple lift jack than you would with those other models.

With all of the versatile functions and the strength of the build, you’ll find that the price only makes this tool shine even more.



  • Maintenance and Upkeep

Because there are a lot of moving parts to this jack, you’ll need to make sure to give it proper maintenance at all times. This is crucial if you want to keep it lasting for as long as it is capable of.

However, unless you are well-versed in this knowledge, it may be a little confusing to figure out how to keep this tool working well. Leaks especially have been known to happen with this model. Make certain to take that into consideration before you decide to purchase it!

  • Repairs

Going along with the above, repairs are another tricky part of this triple lift jack. Still, this can be easily remedied by having the knowledge of how to repair a jack, especially for those who are experienced mechanics.

However, for newer mechanics, it might prove to be a little more troublesome. It could be an interesting way to practice your own repair skills, however!

  • Leakage

There have been reports that this particular model of lifting jack has a tendency to start leaking after a short amount of time.

Although it appears that this is limited to the releases that came out soon after this jack debuted, it is still worth mentioning. This is good to know in case the jack you purchase happens to have a similar problem.

The leaks are capable of being repaired, however. So, with a little bit of know-how, this con might not even be a con at all.

  • No “Snapping” Sound

One problem with this jack is that when you are using the lift, there is no true “snap” that lets you know that it is securely in place. This can leave you feeling a little uncertain as to whether or not the jack is safe to use.

This doesn’t diminish the fact that the jack is still secure and perfectly safe to use. Still, not having that clear “snap” when you expect it can be a downside for some mechanics.


Is This The Best Triple Lift Jack?

It’s not perfect — but it is pretty great. There are some things that could ultimately be improved upon with this model, especially since the maintenance can be a little daunting at times.

It does have extra safety precautions and feels secure. However, that missing sound when everything is in place can leave you feeling uncertain until you get used to it.

Ultimately, for the price and the all-in-one versatility that this jack gives you, it’s hard to beat.

If you need a heavy lifting jack for your mechanical projects, this is a great choice. This is especially true if you are the kind of mechanic who doesn’t just specialize in working on one type of vehicle.

If you have any questions, contact us. We’ll be glad to help you out!

6 Best Jack Stands For Your Vehicles Jack & Jack Stand Buying Guide

Best Jack stand are a crucial weapon in the home-mechanics armory. Solely relying on a floor jack to carry the weight of your car whilst underneath it is at best a risk, but at worst a life-threatening safety hazard. One of the reasons it’s important to double up when you’re working underneath your car is that floor jacks have been known to give out at the critical point. This can be due to long-term usage, wear and tear and leaking of hydraulic fluid. Unfortunately, it’s near impossible to tell when a floor jack will give out. Maybe it’s next year, maybe it’s next week. Faulty floor jacks are responsible for the majority of mechanic related injuries so doubling down with an extra jack stand is one of the best decisions you can make.

Now, every company in the world is going to tell you that their floor jack is the sturdiest, strongest, longest-lasting on the market. To make things more difficult there’s a whole lot of choice, with hundreds of brands all fiercely competing in the same marketplace. Knowing what to look for in a jack stand is half the battle. So, to help you choose, here are the two main things to think about when you’re buying the jack stand:


1⇒What type of car do you own?

It’s a simple question, but one that needs answering before you’re ready to buy. Like cars, jack stands are available in all shapes and sizes. Take a look at your car, measure the weight and ground clearance. The weight and ground clearance are the two most important measurements in choosing the right jack stand. You can find the weight of your car by looking in the owners manual. If you lost it, do a quick check on line. This is not the time for estimating so make sure you know the exact weight. For the ground clearance, you can find it in the manual or bring out the tape measure and measure it yourself. Again, estimates aren’t gonna cut it here. The weight and ground clearance are crucial because, as you can imagine, you’re going to need a very different jack stand for a Mini Cooper than you will for a Hummer. As a rule of thumb, always look to purchase a jack stand capable of carrying twice the weight of your vehicle. For obvious reasons, it’s better to be safe than sorry. The same goes for your ground clearance. Think about how much room you need once the car is lifted off the ground. Don’t go for a lower jack stand because it’s cheaper, give yourself a lot of room to maneuver by opting for the higher jack stands.

Check out Best Car Jack Ultimate Reviews


2⇒Quality over price:

This is one I just can’t stress enough. When I think of my tools, I think of them as investments. Yes, the outlay might be a lot, but a good quality tool can last a lifetime. So, when you break it down, it’s all about spending that little bit more to get something that will last longer. Nobody wants to be buying a jack stand every year for the rest of their lives. Here’s what to look for in a good quality jack stand: A good quality jack stand is going to have a spotless, rust proof finish and the weld beads will be uniform across the joining points. A rusty jack can compromise the lifting weight of the whole machine and poor quality welds are going to wear over time. As I said before, a good quality tool should last a lifetime, so making sure you have that build quality is central to choosing the right jack stand.

Now you know what to look for you can go out, or online, and find out for yourself what the Top rated jack stands available are right now. If you don’t fancy it, stick around because I’ve done the work for you. Below we’re going to look at the 6 Top rated jack stands for 2018.

Our 6 Best Jack Stand Lists For Quick Selection



1. Torin 3 Ton Aluminum Jack Stands

Torin 3 Ton Aluminum Jack Stands

Torin is a US based company and a market leader in home and professional mechanics. It’s a great brand that has a BBB A+ rating with the accredited businesses watch dog. What does this mean? They produce great jacks that pass all the safety checks with flying colors. The latest product, and the first on our list of the 6 good jack stands is the Torin 3 Ton Aluminum Jack Stands. These jack stands are a trendsetter. The aluminum frame is a rarity in the industry and this piece of equipment is a third of the weight of most jack stands on the market. It feels as light as a feather. Perfect for when you are carrying other heavy equipment like sockets, wrenches or other tools which, if you’ve owned a jack stand before, will know that’s no mean feat. From a safety perspective, the Torin 3 ton uses a pin rather than a ratchet. Pin’s are the most reliable way to lift a jack stand and, it won’t fade over time like a ratchet. To make it even safer, Torin has added a spring loaded bearing to make accidental removal impossible. The wide base makes this jack-stand versatile too, boasting great performances on asphalt and dirt surfaces. I told you at the beginning of this piece that fit and finish are great ways to judge a good quality build. On the Torin 3 ton Aluminum jack stand both are flawless. They’ve even managed to make it look pretty. Yes, it’s more expensive than other jack stands on our list, but given the build quality, materials and construction we think it’s worth the money. A sound investment.


  • Great brand
  • Solid Investment
  • Super light-weight
  • Looks sexy
  • wider base for working on tricky surfaces


  • One of the more expensive tools on the list
  • Placing the pin can be tricky
  • You won’t stop staring at it


2. Torin 3 Ton Double Locking Jack Stands

Torin 3 Ton Double Locking Jack Stands

The Torin 3 Ton Double Locking jack stand is a classic. Affectionately known as ‘the big red’ this prime piece of American engineering gives a whole lot of bang for your buck. Torin is a top brand that has led the market for decades. Their flagship jack stand is ‘the big red.’ The 3 Ton Double Locking jack stands have a range of features for safety and performance. First of all, they support three tons of weight. This is perfect for sedans and can even support some lighter trucks. The minimum height supported is 11.7 inches but they go all the way up to a dizzying 16 inches. With these jack stands, you’re going to have more than enough room to get the job done. A nice little feature is the double locking. A double locking means the ratchet has a self-locking system, ensuring they won’t slip during use. Just to make it extra safe, Torin has added an additional pin; for peace of mind as much as anything else. The solid steel construction of the 3 Ton Double Lock guarantees durability and safety so you won’t need to buy a new one anytime soon. Finally, as you would expect with Torin, the build quality is exceptional. It’s our go to buy on our list of best jack stands available in 2017.


  • Solid Steel construction
  • Excellent workmanship
  • Great price for those on a budget
  • A top selling piece of equipment.
  • Great safety features



  • It weighs a lot
  • Not the best looking tool, not that it matters
  • Not the best looking tool, not that it matters
  • At an entry level price, it lacks some sophistication

3. Hein-Werner 3 Ton Jack Stands

Hein-Werner 3 Ton Jack Stands

Moving up a little in our budget for the 6 jack stands available in 2017 is the Hein Werner 3 Ton Jack Stands. These stands are stunning and are sure to stand-out in any garage. Furthermore, they’re made in the USA which means great quality workmanship and easy access to replacement parts should anything go wrong. The Hein-Werner come at a slightly higher cost than anything else on this list but with the features on offer, it’s great value. The base of the jack stands have a wide footprint which gives an even weight distribution even on less than ideal surfaces. You get an astonishing nineteen-inch height when fully extended so if you own an SUV the Hein-Werner is more than capable of giving you the lift you need. Beyond that, the Hein-Werner has a simple ratcheted system that doubles up as a handle for easy lifting. Overall, it’s a simple design done right. An expensive choice, but well worth the money.


  • Made in the USA
  • Wide base
  • Even weight distribution for working on tricky surfaces
  • Excellent build throughout
  • Handle for easy lifting


  • In the upper range of our budget
  • Quite simplistic

4. Wilmar 6 Ton Heavy Duty Jack Stands

Performance Tool W41022 3 Ton Heavy Duty Jack Stand Set

When I talked about tools that last a lifetime I had Wilmar in mind. The Wilmar 6 ton Heavy Duty Jack Stands are the strongest jack stands we have on our list. The solid steel construction, perfect welds, and finish are exactly what we look for when selecting the jack stands for 2017. Capable of sustaining weight of up to 6 tons, the Wilmar is going to handle anything you lay on it. The one criticism I have of these jack stands is the relatively high, 15 inch minimum height. If your car is low to the ground these are definitely not for you. On the other hand, if you’ve got an SUV, this is your dream buy. It all goes back to working out what it is you need from a jack stand. If you’ve got a big car then this is what you need, if your car is smaller opt for one of the cheaper jack stands.


  • will last a lifetime
  • Amazing build quality
  • Capable of holding bigger vehicles



  • Relatively little features
  • It is a specialist tool
  • High budget

5. OTC 1780 Jack Stand


OTC 1780 Jack Stand

The OTC 1780 makes the Wilmar look like a baby in comparison. Capable of sustaining a whopping 22 tons this is the jack stand of choice for truckers. The OTC is a simple tool compared to some of the jack stands on this list but there’s a lot of value in getting the basics right. A wide base means you get a lot of floor coverage that also prevents the base from sinking into the surface. Crucial when you’re dealing with heavier vehicles. The wide base is more than capable of carrying weight on gravel or soft ground without slipping or sinking. With no ratchet there are fewer things to go wrong over time. The reason that the OTC 1780 takes a place on our list of the 6 best jack stands available right now is its versatility. It’s designed to last and can carry any kind of weight you throw at it. For the price, it represents great value for money.


  • Can be worked on softer surfaces without sinkingCarries 22 tons
  • Carries 22 tons
  • Versatile
  • Built to Last


  • Simple
  • Not necessary for small vehicle owners

6. Camco Olympian

Camco Olympian

The last jack stand to feature on our list of the 6 jack stands is the Camco Olympian. The Olympian stands out because of its innovative design, notably the use of a screwing bolt for adjusting height. Having a screwing bolt instead of a ratchet or pin system means you can set the height to your exact requirements. It also comes in as one of the cheapest options on our list so far. As I said at the beginning of this list, you pay for what you get, and the Camco Olympian is the minimum I would be willing to recommend in terms of quality and build. Having said that, it’s a great low-cost tool that is versatile and would be a great addition for propping up trailers, or light cars.


  • Cost
  • Versatility
  • Screw Bolt for minute adjustments
  • Solid Steel construction


  • It won’t last as long as other jack stands on our list.

What types of Jack stand suits me?

This should be the first question you ask yourself when considering a Jack Stand. The answer is related to the kind of car you have, how often will you use it and how many cars you own. If you have a lightweight city car you obviously won’t need a 22-ton jack stand. Equally, if you have a light truck than a cheap 3 ton-ner is just not going to cut it. Consider the weight of your car and buy accordingly. The next thing to look at is how many times you are really going to use it. If you’re a regular mechanic you want to go for something more expensive, simple and made from a sturdy material like steel. Finally, how many cars are you going to be fixing with this jack stand? I have mentioned in the list that some of these tools are versatile and some are specialized. If you have more than one car, opt for a versatile tool.

How to choose the right jack stand for you?

Choosing the right jack stand or best floor jack for you is going to depend a lot on your personal circumstances. How often do you carry out home repairs on your car? Also, what kind of budget do you have? There is no point in bankrupting yourself on a tool you can’t afford and never use. There’s plenty of great value tools on this list so think carefully about your budget and your needs.

Jack stand safety tips

Working underneath your car is dangerous. Making sure you know the capabilities of your jack stand can be the difference between life and death. Always read the safety manual and take every possible precaution. Keep your tools indoors and check for rust on a regular basis. Finally, don’t ever get under a car without first double-checking the pin, ratchet or safety lock is in place.


How big a jack stand does I need for my car?

The height of your stand needs to mirror the ground clearance of your vehicle. If your vehicle is high off the ground like an SUV or truck then you need a jack stand with a good height range. If you have a lower ground clearance then check out the minimum height of your jack stand. If the minimum height is too high you won’t be able to get the jack under the car.

Where do you put jack stands on a car?

Every car will have lift points where the weight is distributed evenly. You can find these in the manual or from a quick search online. Never attach a best jack stand to your car without knowing the lift points, it can do serious damage to your car or yourself.

Who makes a good lift jack

The best way to check this is to see what rating a brand has from the BBB accredited mechanical association. An A+ rating will be a good brand. Also look for the longevity of the brand. Companies that have been around for a long time have been for a reason, it’s usually because they make great lift jacks. Check out the list above to see some of the best brands on the market.

Best Motorcycle Jack Full Buying Guide And Reviews 2018

Best motorcycle jack is a device designed to lift motorcycles, yard traders, and ATVs. The machine has two front wheels and gear rear casters to enhance usage.

An expert in the vehicle repair needs to have motorcycle jack for the implementation of the repair process It is important to use the best tools for lifting the car, and the motorbike for better inspection.

The device helps the mechanics to lift parts of the motors while repairing. It offers the benefits of joyful bike riding after break down. You need to have the perfect motorcycle Jack for the better performance in the market.

Best Motorcycle Jack

Why you need an appropriate motorcycle jack:

Any individual with a motorcycle will tell you the importance of cruising an open highway without something to assist him.

No matter the type of the bike you use, it is advisable you have the device for better repair and maintenance. Every
rider will tell that having bike jack is a good activity. In this article, you get the useful information on
why you need the good motorcycle jack Moreover, you can get the right jacks from the advice given on blogs regarding motorcycle jack reviews The jacks are important for storing and maintaining the process of motorbikes If you purchase a bike, it’s you can be sure that it will need some maintenance and serving.

The processes require a lifting tool for underground servicing and maintenance purposes such as oiling and cleaning. Jacks are essential for storing the motorcycle.

When you raise the motorcycle high, it becomes much easier to work on the bike and maintain. The advantage of
wheels attached to the jacks increases the efficiency by of jacking up the bike. You can move the bike around the garage to test the effectiveness of the motorbike.

It is easy to store them in any location of prevalence. Servicing the bike helps you save money for extra maintenance or breakdown. Also, after the ride, it is appropriate to check on the best techniques of servicing the motorcycle through evaluation of the working of the parts of the engine. In such cases, you need to lift the bike and evaluate the parts to replace.

The perfect motorcycle jack has the best motorcycle lift table to support the weight of your motorbike. Always, make sure the bike seats rightly on the lift table.On your motorbike, you should choose the right jack that is capable of carrying your bike.

While lifting your bike, you need to consider the weight and avoid overload. It is dangerous to overload the lift as it
can break Most of the jacks around have the capability of lifting specified weights When you understand your bike
weight, it is advisable you load the lift accordingly.

Also, you should use the lift table for lifting the bike. The lift table rests the bike, and the supporting stands accelerate the upward movement of the jack Some jacks have safety locks installed; it is, therefore, advisable you use them during the lifting process Your hands and feet should also be away from the pinch points In such cases, do the protective activities to ensure safety and injury.

Also, before you starting lifting the motorbike, ensure that the jack is stable. A good stability is enhanced by the four stands spaced to extended distance.

Dom experienced and overall joy of owning a motorcycle is some motivating aspects of having a personal motorbike. Despite the exciting lifestyle and the fun experienced by the motorcycles riders, there is the cost of maintaining the bike.

It is possible for you to do private maintenance to your motorcycle with the help of some tools, Motorcycles are easier and also fun to repair. To maintain a good fun in riding motorbikes, it is good to have the must-have tool.

Top 5 Motorcycle Lift Comparison Chart

PhotoNameMax loadWeightLifting RangePrice
PowerZone 380047 17 LB Hydraulic MotorcyclePowerZone 3800471700 lb62.4 pounds
4.5” to 14.5”
Black widow MC-JACKBlack widow MC-JACK1100 lb32 pounds3.75" to 16.25"
OTC 1545 Motorcycle Lift OTC 15451500 lb74 pounds3.5" to 16.75"
1500 Lb. Capacity ATVlMotorcycle LiftATV Motorcycle1500 lb98 pounds4.5" to 16"
1100 LB Wide Deck Motorcycle Center Scissor Lift Jack Hoist Stand Bikes ATVsMotorcycle Center Scissor Lift1100 lb30.4 pounds3.75" to 13.25"

Some features of the top motorcycle jack

When selecting the good quality motorcycle jack, it is good to read several buyer’s guides to review the best features jack for Harley. Also, motorcycle reviews from bloggers assist in developing an authentic decision on the purchase of motorcycle jack This article will guide you in Doing a perfect jack for your motorcycle.

When you read this guide, you will be informed in understanding the best features suitable for your bike. Here are some important characteristics of jacks to consider while buying a motorcycle Jack

⇒ Proper hydraulic addition– some jacks use the hydraulic system in operation. When you purchase the jack, you should ensure the system is working properly and can support the required weight of your motorbike. The hydraulic pistols should be strong enough to support the weight of your bike.

⇒ Foot pedal pump- the pump should be able to lift the motorbike with a lot of stability. The tool should work
down to compression straps Also, it should have a tie down on the frame, unlike the lift surface.

⇒ Weight capacity- the best jack should have the minimum weight capacity of about llOOlbs. Such strength
allows a considerable weight lift of a motorbike. The jack should lift the bike to full height and ensure stability. Such
capabilities ensure that the user is secure and protected.

⇒ A removable handle- you may need to buy a motorcycle jack for home-based purposes In such situations,
you should make sure you purchase the jack that has a removable handle to allow easy storage. I would advise you go
for a jack with the handle provide the Harley center gravity centered.

⇒ Safety locks- while buying a Jack, you should make sure it has the safety locks These tools on the jack
provide a good stability during the lifting process.

⇒ Produd warranty- the jack should come with a warranty. The warranty gives assurance of a
quality product from the manufacturer’s Warranty help in the long term operating with the machine.


Our top 5 best motorcycle jack

The market holds several brands of the top motorcycle jacks. In this session, we will inform you about the top 5 jacks.

1) PowerZone 380047 17 LB Hydraulic Motorcycle

PowerZone 380047 17 LB Hydraulic Motorcycle


This type of a jack is also known as the ATV Jack The jack lifts both motorcycles and ATVs ranging from to 14-1f2. It has a foot diverted the hydraulic pump.

Its hands are free to position and stabilize the motorcycle very well.You can trust its security because of the presence of the multiple safety locks The T-Handle provides a Drm grip for best performance. The machine comes with a paint scuffed up. The machine is easy to jack up and hold

The machine comes with a paint scuffed up. The machine is easy to jack up and hold head motors safely. I remember it holds a 20111 Harley Heritage Classic strongly with its~ Battened surface. If you check the frame, it is around 12 off the ground. I used it on a low rider, and it could work well Perfed price for a better deal of a jack.
The PowerZone 380047 17 LB Hydraulic Motorcycle is a cheap machine and easy to assemble. The bearings are well
gauged right into the plates.


2) Black widow MC-JACK


Black widow MC-JACK


The black widow MC-JACK is capable of lifting motorcycles from around 3 8 to about 16 25. It can work best on
these weights before the pressure let off on the front and rear tire during servicing, modification, and maintenance.
Customers enjoy manual operation of the machine by 7I8 socket-driven scissor loading frame.

While doing maintenance, the jack is sturdy. The machine is better to use a 7I8 socket wrench. This weight is possible to raise and lower the jack This ability is safer than the inbuilt tooL On a slippery surface, it is appropriate to pour the OEM powder coating. As many customers have stated earlier, it is risky to lift a motorcycle with the jack stands on a slippery surface. You need to have the power to raise the bike from the leaning on a kickstand position to an upright position.
Black Widow MC-JACK Jack is good for the money. When jacking the bikes, this jack I can say is the best motorcycle
jack in the market.

It supports the jacks very stable with the fore tire off the ground. You can imagine the back is easy
to lift The welds look sloppiest I have never seen a retail product.

3) OTC 1545 Motorcycle Lift


OTC 1545 Motorcycle Lift


The OTC Motorcycle Lift possesses around 1,500 pounds capacity. The Jack has skids of 17 length. A single skid has around 25-3 inches wide.

However, it has a lime locking bar. OTC 1545 Motorcycle Lift has a trustable stability while lifting motors Nevertheless, there it is advisable to check and evaluate the working of the jack because you can buy a jack with the foot pedal with lime control Such limitation makes the jack very shaky when lifting the motors The device is slow in operation, and not stable.

Several customers have complained of this problem. I cannot encourage you to get for business value addition.

4) 1500 Lb. Capacity ATVlMotorcycle Lift


1500 Lb. Capacity ATVlMotorcycle Lift


This number 1 motorcycle jack is good for lifting motorcycle and ATVs. It is good to lift a motorcycle safely and up to 16 above the ground Door. With its locking tools, it can lock at four distinct heights It has a foot-activated pump for allowing upward lifting of the ATV.

When you are through with work, it is possible to collapse the jack for easy storage. You have the trust of the line space occupation when you buy this type of a jack If you have a Honda Shadow from Harley, the machine is capable of lifting it safely.

The details of the device are clear if any maintenance is required. It is very stable and easy to operate when lifting for service of ATV and motors Great product Some customers have complained of missing nuts When buying the jack, ensure to pack all the assembling details for better performance.

The missing bolts may be incompatible with the retail-based bolts It is therefore critical you check everything is packet during the purchase. However, the customer service offers fast support and perfect solution upon any complaint


5) 1100 LB Wide Deck Motorcycle Center Scissor Lift Jack Hoist Stand Bikes ATVs


1100 LB Wide Deck Motorcycle Center Scissor Lift Jack Hoist Stand Bikes ATVs


This machine is easy to use when having a wide-deck scissor jack It is multipurpose because it can be used in motorcycle services and ATVs.

The jack features a rubber mat at the lifting platform to enhance grip at the bottom.
The rubber also increases stability and prevent slippage of the bike while under maintenance. This jack you can use it
for garage duties, shop and track purposes as well. Some buyers have complained of a fragile case of the jack A customer once recorded that the Drst time he lifted a 700 pound motorbike the machine brook Also, it trod off.


How to maintain and clean a motorcycle jack:

Despite the working of the jack, it requires maintenance and cleaning.

√ Get the wheels off the Door-If you have Dished working with the jack; it is good to get the wheels off the ground for maintenance. You should apply oil on the wheels for easy movement The oil makes the rear wheel spin freely during lubrication and lifting motors Free moving wheels rotates easily and prevent the risk of breakdown of the jack.

√ Lubricate the hydraulic system-The hydraulic mechanism of the jack require continuous maintenance and repair of the pistons Smooth working pistons prevents the motorbike from sliding on one side due to lack of balance.

√ Replace the worn out wheels-It is advisable to replace the used fore or rear wheels Brand wheel conundrums Drm grip when lifting an ATV or motorcycle. The stands for lifting the motor should be well greased to the wheels It is easier to operate and reduce breakage.

In the motorcycle industry, it is appropriate to have the best motorcycle jack When using it, ensure good maintenance for better results.

How To Choose Right Floor Jack For Car

A floor jack for car is one of the most basic of tools in a garage. It does not matter whether you are a professional or not. Most of the modifications needed on your vehicle require lifting it to access the under part. That means the jack must be able to lift the car to a desirable height and hold it until you can put some jack stands.

There are various jacks in the market and choosing the right one for you can be an uphill task.  In most cases, you will be spoilt for choice and may not know which jack meets your needs.  Fortunately for you, the following guide will do the trick for you. You can find more about car jack in quick jack review.

What to consider:

Type of vehicle:-

Before anything, consider the type of vehicle that you will be using the jack on. The most important element that you should consider is ground clearance. This term ‘ground clearance’ refers to how high the contact point for your jack is on your vehicle. Essentially, there are cars whose ground clearance is low. If that is the case, then they are easier to lift with most jacks in the market. Vehicles in this category include race cars, sports cars, and low-performance cars. Mostly, the hydraulic floor jack will do an excellent job on low ground clearance vehicles.

The street tuners and other categories of performance vehicles are unique. They have a very low ground clearance, and your average jack cannot negotiate this low point. Typically, the aluminum floor jacks can easily reach the very low suspension upgrades and body kits. Another benefit associated with this type of floor jacks is that they are lighter than other. It makes it easier for you to move them around.

If you own a high vehicle, then choose a bottle jack. However, if you want a jack that you can just toss out during emergencies, then the scissor jack is your perfect choice. However, if you cannot decide which best car jack is the most appropriate for you, then you can still go with a hydraulic floor jack.

The weight of your vehicle:-

When buying a floor jack, it is critical that you consider the weight of your automobile. Mainly, every jack has a maximum capacity regarding weight. Therefore, be wise and make sure your jack exceeds your vehicle’s weight. The rating of the most common jacks is 2 or 3 tons. This capacity is perfect for most vehicles such as the economy and small types.

The standard jack has the versatility for several applications. Even though heavier than aluminum models, they have the application range appropriate for light trucks and subcompacts. These designs are typical in automotive tire shops and repair shops. In particular, they form the majority of floor jacks today. They are the workhorses when it comes to automotive tools.

If you are dealing with heavy trucks that especially have big tires, then you should choose the jacks that have a higher tonnage. The service jacks specially designed for long chassis can easily handle heavier vehicles with higher ground clearance. In other words, the 10-ton jack can easily manage to lift more than 25 inches.  It gives an appropriate lifting height required for high tonnage vehicles. The best thing about some of these jacks is that they come with air assist. This quality gets rid of the great effort needed to pump to lift a vehicle. Essentially, an air cylinder does most of the work.

The material and lifting speed:-

The most common construction material for floor jacks is aluminum or steel. If you are looking for a jack to only use in the garage, then the steel one is the most appropriate. However, if you want a floor jack that is easy to move around, then go for the aluminum jack.

Every jack has a maximum speed depending on how it is built. In most cases, a standard jack can reach a high of 10 strokes. However, if you desire a quicker one with abou3 to 6 strokes for a maximum high, then consider those with a fast lift system or dual lifting pistons. But remember the more rapid the jacks, the more the price you will have to pay.

The quality of the jack:-

One of the most important factors to consider when buying a floor jack is the build quality. It goes without saying that a high-quality jack will be cheaper in the long run. It is not logical to go for a cheap floor jack only for you to replace it after a short period. Initially, the price may be attractive, but it will cost you more regarding having to replace it now and then.

The easiest way to determine quality is lifting the jack and examining the parts. Jacks with predominantly metal parts are more expensive and better quality than those with plastic parts. Both the finishing and weight are other indicators s of quality. If a significant portion of the jack is polished or brushed metal, then the manufacturer may be trying to show off the parts. However, thick coats of paints that are sloppily done indiscriminately on every component are a cause for alarm. The maker may be trying to conceal something from you. Use due diligence and inspect the jack before you make the final purchase decision. You can consider Best 2 post car lift for your car lifting.


Special note

When shopping for a floor jack, don’t forget about jack stands. Mainly, these tools come in a variety of shapes and sizes. The good thing about it is that they provide an additional layer of safety. Furthermore, they are also a source of extra stability so you can work on your vehicle well. When selecting them, remember that the stated rating applies to them as a pair. For example, the 6-ton rating is 3 tons for each. Together, they offer the 6-tons worth of load bearing ability.

Final word for floor jack for car:

There are many jacks out there and choosing the right one for you may prove an uphill task. However, there several things that you need to look out for and it includes the type and weight of your vehicle. The most critical thing to note, however, is the quality of the jack. Cheap is always expensive and so don’t let the low price fool you.


1 2