How To Use A Hydraulic Jack

July 8, 2017

Views

A hydraulic jack is a device used in force lifting heavy loads such as a car. The Jack uses screw thread or hydraulic cylinder in lifting the loads.

Steps on how to use a hydraulic jack to lift a vehicle:

Find a leveled surface:

First of all, find a leveled surface to place the load being lifted for example if it a car makes sure that it is in a flat area for ease work. When it comes to a car, it is always advisable that you confirm with the user manuals so as to know the precautions to take when raising the car from the ground.

How To Use A Hydraulic Jack1

Compare the weight of the jack and the vehicle:

The second step requires you to check the weight of the load so as to make sure that the jack can be able to raise it. For vehicles or tracks, check the user manual to see if its weight can be lifted by that kind of hydraulic jack.

Set the brakes on the car:

Make sure the car is set on its brakes so as to prevent it from rolling or moving while lifting it. You can use wheel chocks on the front and back side of the car to prevent the rear wheel from moving when you lift the car as they tend to roll when the car is lifted even if the brakes are set.

Look for pinch metal to clip:

Then look for a squeeze metal underneath the body of the car where you will be able to clip the jack for lifting. Different cars have different positioned pinch metals, and it is always important that you survey the place to clip before you insert the jack.

Lift the vehicle:

Then make sure the jack handle is a release position and gently slide it under the body of the car to the metal and start lifting the vehicle. You will require a little bit of force when lifting so as to get the car to a suitable position to work.

Hydraulic Jack & Safety Stand Positioning

Support the vehicle:

Place a jack stand underneath the car to support the vehicle as you remove the hydraulic floor jack reviews so you can start working on the car. Start by releasing the jack handle so it can loosen up before you remove it. Then ones you are done use the hydraulic jack to lift the car so you can get enough space to remove the jack stand. Lower the car after removing the jack stand.